Zone Hitting - Working the Pitch Count

Zone Hitting - Working the Pitch Count
By Fred Bonds

Undisciplined hitting has two major pitfalls. First, the batter is not swinging at pitches that are located where he hits most effectively, resulting in weak grounders or fly balls and easy outs. Second, a team of undisciplined hitters will never (and I mean NEVER!) press the opposing pitcher to the point of breakdown. Bottom line is that the pitcher will always maintain control of the ballgame as long as he can count on hitters swinging at his pitch and not theirs.

There are many ways to have a good at bat (let's call it a QAB or quality at bat) from this point on. QAB's come from good clean hits. The pitcher throws the all, you hit it hard, it finds a hole and you're on base. That's the most obvious QAB. The less obvious ones come from forcing the pitcher to throw you your pitch or taking him deep into the count before getting a walk or making an out. Both should be rewarded by teammates for reasons I will explain later.

Let's start by defining a QAB. This is a concept you must learn, understand, and apply every at bat from this point on. A quality at bat is any at bat you have that results in either you getting on base via a hit or walk, or you forcing the pitcher to throw more than four pitchers. Why four? Because if I, as a pitcher, can get you out in 4 pitches and I can do it again for each of your teammates, then my pitch count is 12 pitches per inning, 108 for the game. That's not too bad for a pitcher. Also, it means that you, as a hitter, are only getting 12-16 pitches (if that) per game to hit. Later in the game, you'll not have seen enough pitches to get your timing down and get comfortable. Have you ever wondered why a pitcher, who is cruising along in a game with no real problems but is going to full count with nearly every batter, suddenly gets rocked even though he is doing well? The batters got comfortable with him. They saw enough pitches to figure out how to hit him effectively. That's why closers are so effective even if they throw only one type of pitch.

By forcing the pitcher to throw more pitches, you get to see him longer, and see all of his pitches. Also, you wear him down. So instead of 4 pitches, it now takes 7 pitches to get you and the rest of your team out. Assuming no one gets on base, the pitcher ends up throwing 21 pitches per inning or 147 per game. That is a very high pitch count for anyone, especially high school or collegiate pitchers.

Let's assume that most pitchers have an effectiveness ceiling of 80 pitches. You face a pitcher and get on base in 5 pitches. The next hitter flies out in 6. The number 3 hitter hits a ground ball through in 4 pitches. The cleanup hitter is out in 7. The last batter of the inning fights back from 1-2 only to ground out in 7 pitches. No runs score, but your team has made the pitcher throw 29 pitches in one inning. At that pace, the pitcher should lose his effectiveness in the third inning. If your team continues to wear him down, you will have created a window of opportunity to break the game wide open somewhere in the third or fourth inning.

How do you have a QAB? The answer depends on the situation present when you enter the batters box. For now, let's discuss your first at bat, no runners on, and no outs. You should have a good idea of where your "happy spot" is in the strike zone. A "happy spot" is your power zone. Normally, it is mid-thigh to belt high on the inner half of the plate. Where ever it is, this is the spot that you want to hit the ball for power and solid contact. When you are at the plate, you are looking for a fastball in that specific location. You will not swing at any pitch outside that zone even if it is a strike. Also, you will not swing at any off speed pitch. You will keep looking for a pitch in this zone until you have one strike on you.

With one strike, the zone you are hitting in expands slightly. Now you are looking fastball (or hanging off-speed) across the heart of the plate. Height-wise look just above knees to hip high. You must make a mental note to stay closed as you expand your zone. The odds of getting pitched outside increase dramatically when you have one or more strikes on you. Also, your mind-set should be to hit the ball up the middle. You should not swing at pitches outside of the zone or at off-speed pitches that are not mistakes. You will hit this zone until you have two strikes.

With two strikes, the zone is wide open, extending at least 2 in. on the corners and a ball width up and down the zone. Make note of what the ump is calling and adjust your zone accordingly. Your swing shortens slightly as you look to put the ball in play or foul it off. You are now looking for the ball away and will keep your front hip closed as you approach the ball. You are looking to hit opposite field as a majority of pitches will be thrown to the outer half of the plate with two strikes. You will react to the inside pitch.

Now with this mind-set, the pitcher must throw a minimum of 3 pitches to get you out or get a walk. So, a minimum of 3 pitches to get you out or 4 to walk you. You have that many pitches to find one that is in your hitting zone to hit for power. Expect to go at least 5 pitches as we can expect the pitcher to waste a pitch or miss the zone. It is very likely one of those five pitches will be the money pitch for you. Be ready. The big difference between amateur and professional hitters is that pros can hit the pitch when they get it a majority of the time.

With runners on, your zone will change depending upon where you want to hit the ball, but for the most part, those three zone situations will suffice. Also, should you face a pitcher who is throwing strikes and a lot of them; you will need to match his aggressiveness. Still looking for your pitch, your zone should expand larger after the 1st strike to incorporate the zone the pitcher is hitting. If he's not missing much, you have to step it up a notch and match him. Sure, you are not going to drive up the pitch count (unless you hit him a lot and keep him out there) but you will see pitches you can hit so go get them.

Working the count is extremely important when hitting against a pitcher you haven't seen before. A team effort is required to gain info on what the pitcher has in way of velocity, location, and pitch types. Done properly, batters can swing the advantage to their side of the plate while possibly increasing their batting averages. Will this work every time? Probably not, but it will make you a better hitter and increase the odds of your team winning.

Variations of this approach can be made by moving your initial zone to wherever you want to hit the ball. If I know I can hit the outside pitch away with power, I may want to go after the first fastball I see on the outer half of the plate (very likely the first pitch). It's up to you. The important part of all of this is to learn discipline at the plate and not go up there hacking at anything that moves. Have a plan and stick to it unless the conditions make you change.

Ultimately, QAB's will help raise your batting average, RBI count, and on-base percentage. In order to be effective, however, you must learn to recognize pitches as well as developing a short quick stroke to the ball. Putting it all together is what it's all about!

Fred Bonds is the Director of Research for Area51Sports, an innovative new wood baseball bat company, http://www.area51bats.com. He was director of the Central Michigan Sports Center, director of the BPR Nationals Baseball HS Prospect team, and a former associate scout for the Cincinnati Reds and Global Scouting Bureau. Be sure to visit the Area51Sports website and get on the email list for the latest advances in hitting, coaching, and great discounts on the hottest baseball bats in the game. For more info on wood baseball bats or to contact Fred, go to http://www.area51bats.com.

Article Source: http://EzineArticles.com/?expert=Fred_Bonds

How to Hit a Baseball - Is the Stride Necessary?

How to Hit a Baseball - Is the Stride Necessary?

By Joe Brockhoff

An instructor during my pro days who was teaching me how to hit a baseball told me that if the pitch is straight down the middle, step forward. If the pitch is outside, step toward the outside, and if the pitch is inside, step inside. The problem is that against good velocity, there is absolutely no way for a hitter to wait until after he determines the direction of the pitch before he takes his stride. He will always be late getting to the pitch and will have extreme difficulty with his timing.

Another method made famous by Kirby Puckett, is to raise the front foot in an exaggerated hop-step stride. Many hitters who try this method struggle because they cannot get the front foot down in time to start the stroke.

Super 8 Hitting System techniques are simple, easy and repeatable.

Here is a very important principle: THE STRIDE DOESN'T HIT THE BALL. It merely gets us in position to hit the ball. This means the hands are still back at the completion of the stride. The stride overcomes inertia and supports the hitter against the fastball.

If the pitch is a fast ball, the action would be "stride-stroke". If the pitch is slower, there would be a momentary pause. Example: "stride-(pause) stroke".

The stride is initiated by the large muscle in the upper leg (hip thigh area), which keeps it consistent.

Here are the rules:
1. The stride travels only 6 inches, directly forward, in the same place every time.
2. It occurs at the time of pitcher release.
3. It distributes approximately 30-40% of the weight to the front side, and lands on the ball of the foot, which remains closed, open no more than 45°, which usually happens during the pivot. Some players stride in a "toe tap", with no significant weight on the front foot. If a player places only 10% of his weight down on his stride, how will he get 90% more of his weight off his back side when he rotates to the pitch? He can't.
4. It happens quickly, getting the batter into position to hit.
Finally, never underestimate the importance of a good stride. It is part of the hitter's timing. When he's striding, he's deciding.

The hitter must work on his stride in his baseball hitting drills, using either live or pitching machine practice, so that he can drill "stride and take", just concentrating on technique.

These techniques are fully explained in our baseball hitting tips web site for the "Super 8 Hitting System", completely demonstrated in eight baseball tips which include many tips on how to hit a baseball.

Former Tulane Hall of Fame Baseball Coach, Joe Brockhoff, fully explains his baseball hitting drills with the Super 8 Hitting System, completely demonstrated with videos and hitting drills to help you hit with more power and raise your batting average. http://www.LearnBaseballHitting.com/lcp.

Article Source: http://EzineArticles.com/?expert=Joe_Brockhoff

Sponsor Links:

=======================================
Derek Jeter Hurricane Hitting Machine
=======================================

HurricaneMachine.com - Links

---15 Reasons To Buy a Hurricane Trainer
---6 Questions Often Asked By Customers
---Message to Parents From Coach Nick
---Hurricane Hitting Machine Drills
---20-Minute Hurricane Batting Practice Workout
---Hurricane Hitting Machine Video Demo Clips

Baseball2u.com has a one of the internet's largest selections of baseball coaching and training dvds.


Hurricane Video

Baseball Tips on Hitting - Hitting Problem Against Tough Low and Away Strikes

By Larry Cicchiello

When trying to overcome any baseball hitting struggles, you should always look for the "easy fix" first before getting more complicated. Here is a list of things to try if low and away pitches are causing baseball hitting problems for you:

• The two most obvious reasons can be you are standing too far away from the plate or maybe your bat is not long enough and you cannot effectively reach the pitch over the outside corner. Like I said, we always start out simple.

• You may be opening your front side too early, one of the most common baseball hitting problems for hitters at any level. It simply means that you are opening up too quickly and are pulling away from where the hitting is taking place. It simply takes you too far away from the pitch, especially pitches over the outside portion of the plate. Baseball hitting is not taking place out toward the third base coach if you are a right-handed hitter or by the first base coach if you are a left-handed hitter. The hitting is taking place right in front of you and not to the side. You can try striding with your front foot closed instead of pointing straight out across from your body or even worse yet toward the pitcher. In other words, turn the toes on your front foot and point them a little bit back toward the catcher. This will encourage you to "stay closed" and not "fly open" and away from the pitch. Baseball hitting does not take place out toward third base or out toward first base. It takes place right in front of you. Please, stay closed

• You can try bending at the waist if you are not bending already or bend a little more if you are bending already. This will give you better extension and better plate coverage of the outside corner simply because you will be closer to it.

Larry is the president of Larwenty Online Enterprises Inc. He is also the author of "Excellent Baseball Coaching: 30 Seconds Away." If you are a baseball player or baseball coach at any level of play, or a parent who wants to help your child improve, you will be fully equipped! His baseball website offers several FREE baseball tips from his very informative and very fairly priced eBooks.

Larry's baseball website is http://www.larrybaseball.com/

Article Source: http://EzineArticles.com/?expert=Larry_Cicchiello

===Advertisement from our sponsor:=====

Baseball2u.com/CoachesBest.com is the ultimate online baseball training and coaching store. With over 1400 products organized into categories Baseball2u.com makes finding that baseball training product easy and simple. Order securely online or by phone. Baseball2u.com is a fully licensed company and has a full time staff available from 8:00 to 5:00 CST. Their toll free customer service number is 1-877-431-4487.

The Categories they have are: Baseball Training Equipment, Youth Baseball Training Equipment, Training Bats, Pitching & Throwing Trainers, Defensive Trainers, Batting Cages, Pitching Machines, Jugs Equipment, Game and Practice Baseballs, Protective Practice Screens and Nets, Portable Pitching Mounds, Baseball DVDs & Books, Clearance Items on Sales, BatAction Hitting Machines, Hurricane Hitting Machines, NEDCO Bataction Replacement Parts, SKLZ Hurricane Replacement Parts and Much Much More! Visit Baseball2U.com today!

Hitting a Baseball - Using the Gaps

By Nate Barnett

How do you tell if a hitter is creating the correct energy and movement at bat? One simple way (there are obviously more technical ways) is to observe where most of the balls are traveling while hitting a baseball. If a hitter is directing balls into the gaps (regardless if they are ground balls or fly balls) he's on the right track. On the flip side, if a lot of balls are being sliced down the opposite field line or hooked to the pull side, some mechanical alterations are necessary. Two common causes are found here:

1. The most common root cause of hooking or slicing while hitting a baseball is improper control of the front side of the body. A good baseball swing begins with the movement of the back part of the body (specifically the back knee and hip). During this brief period of time the front side of the body (basically all joints on the front side) need to remain relatively unmoved. The purpose of this is so that the back side of the body moves towards the play. If the front side moves at the same time as the back side of the body, momentum is being taken away from the pitch. It is then more difficult for the athlete to keep his bat moving through the zone. Instead, the bat cuts across the zone and creates a lot of side spin on the baseball as well.

2. Another cause of hooked or sliced balls is how the hands enter and pass through the strike zone. The path any hitter needs to take with the hands is a direct and straight path into the hitting zone. Unfortunately, the problem of a weak front side (described in #1) tends to drag the hands away from the body. The end result is hands that progress through the zone in a sweeping fashion. This type of problem only increases the likelihood that side spin will occur while hitting a baseball.

Nate Barnett is owner of BMI Baseball designed to improve the mental game of baseball in athletes. Learn how to help your game by improving your baseball psychology

Nate Barnett is owner of BMI Baseball designed to improve the mental game of baseball in athletes. Learn how to help your game by improving the skill of mental baseball

Article Source: http://EzineArticles.com/?expert=Nate_Barnett


Sponsor Links:

Baseball2u.com/CoachesBest.com is the ultimate online baseball training and coaching store. With over 1400 products organized into categories Baseball2u.com makes finding that baseball training product easy and simple. Order securely online or by phone. Baseball2u.com is a fully licensed company and has a full time staff available from 8:00 to 5:00 CST. Their toll free customer service number is 1-877-431-4487.

The Categories they have are: Baseball Training Equipment, Youth Baseball Training Equipment, Training Bats, Pitching & Throwing Trainers, Defensive Trainers, Batting Cages, Pitching Machines, Jugs Equipment, Game and Practice Baseballs, Protective Practice Screens and Nets, Portable Pitching Mounds, Baseball DVDs & Books, Clearance Items on Sales, BatAction Hitting Machines, Hurricane Hitting Machines, NEDCO Bataction Replacement Parts, SKLZ Hurricane Replacement Parts and Much Much More! Visit Baseball2U.com today!

'''''''''''''''''''''''''''''''''''''''

Check us out on Twitter:

Blog4Coaches
Blogs4Coaches.com

Baseball Coaching Digest - The 4 Key Elements That Help a Batter Hit a Baseball With More Power

The Derek Jeter Hurricane Hitting Machine, by SKLZ. Availabe at fine sporting goods stores nationwide or at Baseball2u.com.

By Nick Dixon

Every baseball player loves to hit the ball hard and far. The power required to hit the baseball deep comes from the generation of maximum bat speed. The generation of bat speed is created by the correct use of the lower body, hips and hands. Four key elements are required to make the batting swing more powerful.

This article outlines and explains those key elements.Those key elements are:

1) The Batter Uses the Front Leg as Leverage to Generate Maximum Bat Speed. - What is leverage in the baseball swing? Why is leverage important? How is leverage generated? Leverage in a baseball swing is a resistance point or stationary object that stops forward movement. The front foot acts as the lever and provides leverage to the swing. For this leverage to occur the batter must allow the ball pass front foot. The front foot should be closed with the toes pointed toward the plate to supply maximum leverage to the swing. This leverage is the force against which the batter rotates the hips against. The front leg must be strait and planted to allow the hips to turn.

2) The Batter Generates Maximum Rotational "Torque of the Hips". - I use the term "Hip Torque" to describe the power the hips add to the swing. Batters must rotate the hips to achieve maximum bat speed. To get the maximum hip turn the front foot should be kept in a closed position. If the front foot is allowed to rotate or is in an open position at any point during the swing, there will be a loss of hip energy and a reduction of power in the swing.

The back foot is often lifted or turned up onto the toe. Many coaches describe the action of the back foot as a turn of the "shoe laces to the pitcher". The back foot action is not nearly as important as the front foot. The one thing that must be monitored is that the back foot does not travel forward. The back foot should stay where it was at the beginning of the swing, but the heel should lift and the foot turn to free the back side and to allow for maximum hip and torso rotation.

3) The Batter Keeps of the Hands Close to the Body. The Batter Keeps the Hands on the Shortest Power Path to the Ball. - The power track for the hands is a path that starts above the ball and close to the body. The "power track" is a short compact swing that is directly to the ball. To generate great bat speed the batter must drive the knob and bury it at the power contact position. Keeping the hands closer to the body also keeps the hands inside the ball.

4) The Batter Achieves Maximum Extension Through the Ball. - The batter that keeps the bat on the ball plane as long as possible is able to generate the maximum amount of power possible. The track or path of the bat should be downward until it gets to the balls plane. When the bat gets on an even plane with the ball, the batter should then drive the hands forward through the ball. This power extension has the top hand in a palm down position and the bottom hand in a palm up position. This forward extension or drive through the baseball is a key element of generating power.

I hope that this article was informative and helpful to you. I appreciate you taking the time to read. Have a great day, Nick.

Productive Outs at the Plate

By Larry Cicchiello

Sometimes it's a little thing that helps win a ballgame. It's not always what makes the headlines in the newspapers or something that draws the most attention. "Productive outs" definitely fit into the category of little things that aren't so little at all.

I think it's a truly great at bat when an important run is on third base with less than two outs and the batter hits a very weak six-hopper to the second baseman and the much needed run scores. If the infield is playing fairly deep with a very important runner on third base, just focus on contact. If you can put the ball on the ground it's usually enough to get the run in. If it turns into a hit, that's better yet. The main objective is that you put the ball in play. You must make contact and not give the pitcher the all important strike out that he desperately needs.

Another productive out is when an important runner is on second base and is advanced to third base with a grounder on the right side of the infield with no outs. Productive outs are especially important to teams that play lots of close, low scoring ball games because they may very well have to "scratch and claw" to get runs.

To Be Clear On A Couple Of Things:

Hitters in the heart of the batting order. They very seldom should be looking to make productive outs. I didn't say never. I said very seldom. For example, with no outs, they should not be trying to advance the runner from second base to third base and give themselves up for the first out of the inning. That's the same as if they're saying, "here, someone else take the responsibility to knock in the run, not me." The better hitters should not give themselves up and should not leave it up to other hitters to drive in the runs.

When trailing by several runs. If your team is trailing by several runs late in the game and you ground out with no outs and have your runner go from second base to third base, there is nothing productive about that at all. The same holds true with a runner on third base with no outs or one out and you are trailing in the game by several runs. If you ground out and the run scores, there isn't anything productive about that at bat either. The other team got the out that they wanted.

Make sure productive outs are true productive outs and not counter productive outs!

Larry Cicchiello is the author of "Excellent Baseball Coaching: 30 Seconds Away." His very user friendly eBooks cover 320 topics on playing or coaching excellent baseball. ANY players, coaches or parents who want to help their child improve will be fully equipped! Some FREE tips are available at http://www.LarryBaseball.com/product/all

Article Source: http://EzineArticles.com/?expert=Larry_Cicchiello

=================



===Advertisement from our sponsor:=====

Baseball2u.com/CoachesBest.com is the ultimate online baseball training and coaching store. With over 1400 products organized into categories Baseball2u.com makes finding that baseball training product easy and simple. Order securely online or by phone. Baseball2u.com is a fully licensed company and has a full time staff available from 8:00 to 5:00 CST. Their toll free customer service number is 1-877-431-4487.

The Categories they have are: Baseball Training Equipment, Youth Baseball Training Equipment, Training Bats, Pitching & Throwing Trainers, Defensive Trainers, Batting Cages, Pitching Machines, Jugs Equipment, Game and Practice Baseballs, Protective Practice Screens and Nets, Portable Pitching Mounds, Baseball DVDs & Books, Clearance Items on Sales, BatAction Hitting Machines, Hurricane Hitting Machines, NEDCO Bataction Replacement Parts, SKLZ Hurricane Replacement Parts and Much Much More! Visit Baseball2U.com today!

Hitting a Baseball - Finding the Root Cause of a Mechanics Problem

By Nate Barnett

There is nothing more frustrating for a hitter than having a mechanical problem with the baseball swing and not knowing what the issue is or how to find a solution. While I don't have the ability here (nor do you have the patience to sort through it) to discuss all of the root causes to the countless mechanical failures of a baseball swing, I will give you one for today. Of course, you will need to consult with your hitting instructor for more depth and practical baseball drills to help solve the problem I discuss.

Let me point out the biggest lower body problem for hitters. I say the biggest problem in the sense that it does the most damage when trying to hit a baseball effectively.

The Problem: Hips floating forward

At the beginning of the swing, the hitter must begin to transfer some weight from the (presumably balanced) stance position onto his back leg. The weight distribution will then be roughly 60% weight on back leg, and 40% on front leg. Most hitters can do this step quite easily without a lot of baseball drills to assist.

The second movement a hitter makes is to begin to take some of the weight he has loaded onto his back leg and move it forward to create energy (this is the trigger process). At this time the back knee and foot begin to rotate towards the pitcher. This is when the hips floating forward problem begins for most hitters.

The weight that was originally placed on the back leg MUST remain there as the rotation occurs. You can see if this is happening by looking at the angle of the back leg. If there is a bend in the back leg at the knee (during contact with the baseball), there is a good chance this hitter is keeping his weight back. If the back leg is relatively straight when the hitter makes contact with the pitch, then the problem of hip floating forward has occurred. The only reason this happens is that many times younger hitters think they must move towards the baseball and begin turning their body with their rear hip and moving it forward towards the pitcher. This does nothing to create energy, and in fact, destroys the ability to create a quick and powerful swing.

Nate Barnett is owner of BMI Baseball designed to improve the mental game of baseball in athletes. Learn how to help your game by improving the skill of mental baseball

Article Source: http://EzineArticles.com/?expert=Nate_Barnett

BatAction Links


---BatAction Machine at CoachesBest.com
---BatActionMachine on Ebay.com
---BatAction Machine Video Clips
---BatAction Trainer - 15 Reasons Why You Must Own This Machine
---Message to Parents From Coach Nick
---If you are looking for BatAction Replacement Balls or Power Bands Click Here

BatAction Demo Videos on Youtube